Helpful Information; Energy Saving And Operation Hints - Panasonic CS-E9BKP Bedienungsanleitung

HELPFUL INFORMATION

I Auto Operation Button
INVERTER
LOW-POWER LOW-POWER MONITOR-HIGH MONITOR-HIGH
• Raise the front panel and press.
G Automatic Operation
• If the remote control fails to function or has been
misplaced, press the Auto Operation button to start
the Automatic operation.
• The Automatic operation will be activated
immediately once the Auto operation button is
pressed. However, temperature cannot be adjusted
in this operation.
• The power indicator on the indoor unit will blink until
the operation mode is selected automatically.
• To cancel this operation, press once more.
9
Downloaded from www.Manualslib.com
I Auto Restart Control
• If there is a power failure, operation will be
automatically restarted under the previous operation
mode and airflow direction when power is resumed.
ECONOMY ECONOMY SLEEP SLEEP TIMER TIMER POWERFUL POWERFUL
(When the operation is not stopped by remote
control).
• If you do not want the unit to restart automatically
when power is resumed, switch off the power
supply.
• If you do not require Auto Restart Control, consult
your dealer.
• Auto Restart Control is not available when Timer or
Sleep Mode is set.
• When the operation restarts, the outdoor unit will
operate only after 3~4 minutes.
I Timer Setting
• When power failure occurs, the timer setting will be
cancelled. Once power is resumed, reset the timer.
I Thunder and Lightning
• This air conditioner is equipped with a built-in surge
protective device. However, in order to further
protect your air conditioner from being damaged by
abnormally strong lightning activity, you may switch
off the main power supply and unplug from power
socket.
I Voltage fluctuation
• The outdoor unit stops operation frequently due to a
fluctuation in the voltage. Consult your dealer.
manuals search engine
ENERGY SAVING AND OPERATION
HINTS
Here are some useful tips for optimum performance
and cost-effective operation.
I Setting the Temperature
• Approximately 10% of electricity can be saved.
• Set the temperature higher or lower than the
desired temperature.
Cooling Operation : 1°C higher
Heating Operation : 2°C lower
I Air Filters and Air Purifying Filters
• Clean the air filters every 2 weeks and the Air
Purifying Filters every 6 months.
• Dirty filters may reduces cooling or heating
efficiency.
I Keep All Doors and Windows Closed
• Otherwise, cooling or heating performance will be
reduced and electricity cost is wasted.
I Outdoor Unit
• Do not block the air outlet vents. Otherwise, it will
lower the cooling or heating performance.
I Timer and Sleep Mode
• To prevent wastage of electricity, use sleep mode
when sleeping or Timer when going out.
I Avoid Direct Sunlight
• Keep curtains or drapes closed to avoid direct
sunlight during cooling operation.
I Do not overcool!
• A difference of 6°C or less between the outdoor and
indoor temperatures during cooling is ideal.
Anything cooler may harm your health.