Panasonic TY-WK3L2RW Anleitung Zur Anbringung Seite 9

7. Anchoring the LCD TV
Install the accessory screws for securing unit (2) into the
mounting holes of the screws for securing unit on the sides
(left and right) of the wall-hanging bracket.
Securely tighten the left and right red-marked screws
the left and one at the right) used to anchor and release the LCD
TV in the red-marked screw mounting holes on the side of the
wall-hanging bracket used to anchor and release the LCD TV.
(Tightening torque: 1.2 to 1.5 N•m)
Note
• In order to prevent the LCD TV from becoming disengaged from the
wall-hanging bracket, the screws for securing unit must be securely
tightened at the left and right as far as their bases.
8. How to remove the LCD TV from the wall-
hanging bracket
Remove the screws for securing unit (one at the left and one at
the right) which are mounted on the sides of the wall-hanging
bracket.
While lifting the bottom part of the LCD TV, pull the LCD TV
toward you.
Once the insulation spacers at the bottom have been released,
lift the LCD TV straight up.
Red-marked screw
and release the LCD TV
Screw for securing unit
(one at
Hole for mounting the screw
for securing unit
Mounting hole for
red-marked screw used to
anchor and release the LCD
Wall-hanging bracket
Screw for securing unit
Insulation spacer at bottom
used to anchor
TV
9