Panasonic TY-ST103PF9 Montageanleitung

English
Points to note when using the Pedestal for LCD Display
Pedestal for Plasma Display TY-ST103PF9 can be attached to LCD Display.
When attaching Pedestal for Plasma Display TY-ST103PF9 to LCD Display, please read this
leaflet as well as Installation Instructions and install correctly.
After installation, please keep this leaflet with Installation Instructions.
● To obtain more information besides the cautions stated below, read "Precautions with
regard to setting up" on "Installation Instructions".
■ When using Pedestal, secure at least 10 cm (3.9") of space at the top, bottom, right
and left of the LCD Display. Also secure at least 20 cm (7.9") of space at the back.
Do not block the space between the bottom of the display and the floor.
Failing to do so may result in a fire.
■ When installing or removing the LCD Display, use a lowering device (machine), and
ensure that the work is done by at least four persons.
Otherwise the LCD Display may fall down and personal injury may result.
Weight of the pedestal: Approx. 122kg (2.69 lbs)
For the weight of the LCD Display, see the Operating Instructions of the LCD Display.
Caution
● For more information, please read Installation Instructions.
3. Place the display on the pedestal.
3. Prepare the Display.
Remove the eyebolt caps (on each side) from the rear panel of the Display.
LCD Display
Eyebolt cap