Multifunction Display; Meter Functional Operation - Benelli LEONCINO 800 2021 Bedienungsanleitung

Instrument and control functions

Meter Functional Operation

DISPLAY SETTING
1. Mileage Setting
2. Clock Setting
EN
3. Trouble Codes
3
4. Backlight Setting
5. Theme Setting
6. Version Information
1. Mileage setting
Allows you to switch the unit of measure-
ment to Miles or Kilometers and to select
and reset the partial A / B kilometers.
Press the UP or DOWN button to select
the desired icon, press the ENTER button
to con rm.
To reset the partial kilometers, press and
hold the ENTER button
Press the button to exit.
2. Clock setting
When enter the clock setting interface,
press the UP and DOWN key to adjust the
rst digit, press the button "ENTER" to con-
rm, and then adjust the second digit. Press
the button " " to exit when the settings
are complete.
3. Trouble code
If the vehicle fails, you can see the trouble
code here.
4. Backlight setting
There are two modes for the backlight set-
ting, automatic mode and manual mode.
When in manual mode, you can adjust the
brightness to one of ve levels.
5. Theme Setting
There are two modes for the theme set-
ting, automatic mode and manual mode.
When in manual mode, you can choose
daytime mode or night mode.
6. Version information
You can see the version information here.
3 - 6
Multifunction display controls
Left
1. Enter button
2. Up key
Right
1
2
1. Back button
2. Down key
1
2