Gsm Communication; Prepare The Truma Inet Box - Truma iNet Box Gebrauchsanleitung

Several mobile devices can be logged on at the
Bluetooth connection (mobile phones, tablet PCs).
Four mobile devices can control the Truma iNet Box at
the same time.
The first mobile device set up (administrator) remains perma-
nently in the Truma iNet Box memory. When the maximum
number of mobile devices is reached, the new mobile device
overwrites the oldest one in the memory (apart from the
administrator).
The first mobile device set up (administrator) can only
be deleted by restoring the factory setting (see "Factory
setting" on page 23) in the Truma iNet Box.
The Bluetooth pairing mode is automatically ended
following a successful set-up.

GSM communication

Prepare the Truma iNet Box

A Bluetooth connection must first be established before
the GSM communication can be set up and operated.
A Mini-SIM card with its own call number and sufficient credit
is required for GSM communication. The Mini-SIM card is not
included in the scope of delivery.
Inserting the Mini-SIM card
– Push the Mini-SIM card into the "SIM" slot as shown (Fig-
ure 3) until it engages.
– When doing this, make sure that the card is inserted into
the guide provided for that purpose and that it is under no
circumstances inserted the wrong way round.
18
Figure 3 – Mini-SIM card
Removing the Mini-SIM card
– Pressing the Mini-SIM card again enables it to be removed.
If you have any questions about your Mini-SIM card,
contact your mobile phone supplier
iNet Box