Display And Control Elements / Connections; Preparing Start-Up; Installing The Truma App On A Mobile Device - Truma iNet Box Gebrauchsanleitung

Display and control elements /
connections
Display elements
Figure 1 – Front view
Blue LED (BLUETOOTH)
– flashes upon pairing
– lights up briefly following a reset to the factory settings and
appliance search at TIN 2
– lights up continuously when there is a Bluetooth connection
Green LED (POWER)
– flashes during start-up and lights up during operation
Red LED (GSM)
– lights up when GSM operation is not possible
– flashes when GSM operation is not set up
– does not light up when GSM operation is set up
16
iNet Box
Control elements / connections
1
Figure 2 – Top view
1
Button
Connect BLUETOOTH, reset to the factory settings and
perform appliance search
2 Mini-SIM (25 x 15 mm)
3 External antenna connection for GSM antenna
4 Changeover switch internal / external GSM antenna

Preparing start-up

Installing the Truma App on a mobile device

1. Load the Truma App from the Apple App Store or Google
Play onto the mobile device.
2nd Install the Truma App on the mobile device.
If necessary, update the Truma App if it is already
installed.
3. If the Truma App is to be used on several mobile devices,
steps 1 and 2 must be repeated for each mobile device.
4. To continue installation, follow the instructions in the Truma
App or the instructions below.
2 3 4