HEIDENHAIN EIB 8000 Betriebsanleitung Seite 34

7.3 Disposal
Incorrect disposal of the product!
Incorrect disposal of the product can cause
environmental damage.
Do not dispose of electrical waste and
electronic components in domestic
waste
The integrated backup battery must be
disposed of separately from the product
Forward the product and the backup
battery to recycling in accordance with
the applicable local disposal regulations
If you have any questions about the disposal of the
product, please contact a HEIDENHAIN service
agency
36
NOTICE
8 Specifications
Product
Dimensions Approx. 483 mm x 318 mm x 44 mm
Electrical data
Power supply AC 100 V ... 240 V (±10 %)
50 Hz ... 60 Hz (±3 Hz)
Max. 250 W
Cable length up to 3 m
3-pin power connector, female,
as per IEC 60320
Input current Max. 2.1 A
Line fuse T 3.15 A H; AC 250 V; 5 mm x
20 mm; quantity: 2
Backup battery Lithium battery, type CR2477; 3.0 V;
temperature range: –20 °C ... 70 °C
Encoder inputs X111, X112, X211, X212, X311, X312,
X411, X412
MDR 26 connections, 26-pin, female for eight encoders
Input signals 1 V
PP
Power supply for DC 5.25 V ± 0.1 V
encoders
Max. 450 mA per channel
Overcurrent protection
(automatic switch-off, resettable)
at 550 mA
Data register for 48 bits
measured values
Measured-value Total of approx. 1,000,000 position
memory values (approx. 125,000 position
values per channel with 8 axes (see
User's Manual for Application Devel-
opment)
1 V Cable length: max. 150 m
PP
Input frequency: Max. 20 MHz
Subdivision factor: 65536-fold
Signal adjustment:
Online compensation
Signal shape compensation
Position value filter with
adjustable bandwidth and charac-
teristic
The specified cable length applies
when HEIDENHAIN cables are used;
the supply voltage range of the
encoder must be maintained!
HEIDENHAIN | EIB 8000 | 09/2018