Electrical Safety Precautions; Items Supplied - HEIDENHAIN EIB 8000 Betriebsanleitung

2.5.2

Electrical safety precautions

WARNING
Hazard of contact with live parts when opening the
unit.
This may result in electric shock, burns or death.
Never open the housing
Only the manufacturer is permitted to access the
inside of the product
NOTICE
Damage to internal parts of the product!
If you open the product, the warranty and the
guarantee will be void.
Never open the housing
Only the product manufacturer is permitted to
access the inside of the product
WARNING
Hazard of dangerous amount of electricity passing
through the human body upon direct or indirect
contact with live electrical parts.
This may result in electric shock, burns or death.
Work on the electrical system and live electrical
components is to be performed only by trained
specialists
For power connection and all interface connections,
use only cables and connectors that comply with
applicable standards
Have the manufacturer exchange defective electrical
components immediately
Regularly inspect all connected cables and all
connections on the product. Defects, such as loose
connections or scorched cables, must be removed
immediately
NOTICE
Electrostatic discharge (ESD)!
This product contains electrostatic sensitive
components that can be destroyed by electrostatic
discharge (ESD).
It is essential to observe the safety precautions for
handling ESD-sensitive components
Never touch connector pins without ensuring proper
grounding
Wear a grounded ESD wristband when handling
product connections
26
3 Mounting
3.1 Overview
This chapter describes the Mounting procedure for the
product.
The following steps must be performed only
by qualified personnel.
Further information:
Page 25
3.2

Items supplied

The following items are included in the standard items
supplied:
Product
Power cable with European plug (type F)
CD with driver software and examples
Operating Instructions
Addendum (optional; for more information, see "Notes
on reading the documentation", Page 22)
Unpacking
Open the top lid of the box
Remove the packaging materials
Unpack the contents
Check the delivery for completeness
Check the delivery for damage
If damage occurred during transit:
Keep the packaging materials for
inspection
Contact HEIDENHAIN or the machine
manufacturer
This applies also if damage occurred to
requested replacement parts during transit.
In case of damage in transit
Have the shipping agent confirm the damage
Keep the packaging materials for inspection
Notify the sender of the damage
If necessary, contact your distributor for mediation
Contact your HEIDENHAIN distributor or OEM for
replacement parts
"Personnel qualification",
HEIDENHAIN | EIB 8000 | 09/2018