Hitachi DH 30PB Bedienungsanleitung Seite 9

5. Groove digging and edging (striking only) (DH30PC)
Cold chisel (SDS-plus shank)
Cutter (SDS-plus shank)
6. Grooving (striking only) (DH30PC)
Grooving chisel (SDS-plus shank)
7. Bolt placing operation with Chemical Anchor (rotation + striking)
Standard socket
( )
on the market
8. Drilling holes and driving screws (rotation only)
Drill chuck, chuck adapter (G), special screw and chuck wrench
Special screw
9. Drilling holes (rotation only)
Drill chuck (13 VLA)
Chuck wrench
(SDS-plus shank)
12.7 mm Chemical Anchor Adapter
19 mm Chemical Anchor Adapter
Drill chuck (13 VLR)
Chuck wrench
Chuck adapter (D)
(SDS-plus shank)
Chuck adapter (G)
(SDS-plus shank)
English
8