Herunterladen Inhalt Inhalt Diese Seite drucken

Trend-Daten Drucken; Printing Trend Data - Dräger Oxipac 2000 Gebrauchsanweisung

Inhaltsverzeichnis

Werbung

Drucken
Echtzeit-Meßprotokoll drucken

Trend-Daten drucken

6 Die Druckintervalle wurden
während des Drucks auf
15 Sekunden eingestellt,
Einstellen siehe Seite 29.
Für einen neuen Patienten
Taste ˇ drücken:
Oxipac 2000 druckt eine neue
Abschlußlinie, der Vorgang
wiederholt sich.
Oxipac 2000 speichert die Trend-
Daten kontinuierlich, auch während
des Drucks der Echtzeit-Meßproto-
kolle, in 30 Sekunden-Intervallen.
Die Echtzeit-Meßprotokolle werden
solange gedruckt bis Oxipac 2000
abgeschaltet wird bzw. sich automa-
tisch abschaltet.
Trend-Daten drucken
Ladestation und Drucker sind
betriebsbereit miteinander
verbunden. Oxipac 2000 ist in die
Ladestation gesteckt.
Stecker des Sensors aus dem
Oxipac 2000 ziehen.
Drucker einschalten.
Oxipac 2000 einschalten =
Taste å drücken.
This "Instructions for Use" manual is published for public use and is only meant for your information.
We do not guarantee the accuracy of these instructions with respect to your specific device type or status.
Only the "Instructions for Use" manual delivered together with a device is officially published for the use of that specific device.
22
0:02:45
97%
6
0:03:00
98%
0:03:15
97%
0:03:30
97%
0:03:44
97%
0:03:49
97%
0:03:54
98%
0:03:59
98%
**************************************
DATA LOG
ID___________________________
_____________________________
Printing
Printing real-time data log

Printing trend data

80bpm
7 The intervals during print-out have
73bpm
been set at 15 seconds. To adjust
77bpm
these, see page 29.
80bpm
85bpm
84bpm
87bpm
82bpm
For a new patient
Press ˇ key.
Oxipac 2000 prints a new dividing
line; the process is repeated.
Oxipac 2000 continues to store trend
data at 30 second intervals, even
while the real-time data log is being
printed.
Real-time data logs will go on being
printed until Oxipac 2000 is either
switched off, or switches itself off
automatically.
Printing trend data
Charger and printer must be
connected and ready for operation.
Oxipac 2000 is inserted into charger
base.
Disconnect sensor plug from
Oxipac 2000.
Switch on printer.
Switch on Oxipac 2000 =
Drucker
press å key.
printer

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis