Step 2 - Empty The Boilers; Step 3 - Start Descaling - Gastroback 42640 Bedienungsanleitung

rSEt will appear on the LCD.
c) Rotate SELECT dial until 'dESC" appears
on LCD and press the dial to confirm.
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
2 Empty Boilers
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
WARNING: Always ensure that the drip
tray is inserted properly, before opening the
valves. Do not hold your hands or any deli-
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
cate objects near the boiler valves at the DES-
CALE ACCESS to avoid injuries and damage
due to hot water splashing out and steam that
may escape, when opening the boiler valves.
Always cover the drip tray beneath the valves
with a cloth, before opening the valves.
a) Remove the grey silicone cover on the
lower front panel marked DESCALE
ACCESS.
REMOVE
REMOVE
+
POWER
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
REMOVE
b) Place a cloth over the drip tray to prevent
REMOVE
steam escaping.
c) Use a flat head screw driver to rotate
the right valve counter-clockwise SLOWLY
until fully open. As the valve opens, steam
may be released.
d) Repeat the above process on the left
valve.
Note:
If there's no water released into the drip
tray, press and hold the 1 CUP button for
3 seconds. This will release water from the
boiler.
When the water is completely empty, close
the valve by rotating screws clock-wise until
seated. Do not overtighten screws to avoid
damages to the valves.
e) Empty the drip tray, use caution as the
drip tray may be hot.
f) Empty water tank, remove water filter.
102