Ecler CA200Z Bedienungsanleitung Seite 73

TYPE PARAM1 PARAM2
INC/DEC PRESET_NUMBER <Count>
IN_VOL <Input=I1:I6>
IN_BASS <Input=I1:I6>
IN_MID <Input=I1:I6>
IN_TREBLE <Input=I1:I6>
XLEVEL <Input=I1:I6>
ZONE_VOL <Zone=ZA:ZD>
GEQ_GAIN <Zone=ZA:ZD>
PARAM3 PARAM4
<Count>
<Count>
<Count>
<Count>
<Zone=ZA:ZD> <Count>
<Count>
<Band=B1:B10> <Count>
73
DESCRIPCIÓN
INCrements / DECrements the current active PRESET number
Increments / decrements a certain INPUT's current VOLUME. The increment
applied is defined by the Count parameter (dBx10)
Increments / decrements a certain INPUT's current BASS tone LEVEL. The
increment applied is defined by the Count parameter (dBx10)
Increments / decrements a certain INPUT's current MIDDLE tone LEVEL. The
increment applied is defined by the Count parameter (dBx10)
Increments / decrements a certain INPUT's current TREBLE tone LEVEL. The
increment applied is defined by the Count parameter (dBx10)
Increments / decrements a certain CROSSPOINT current VOLUME (matrix level
sent from one input to one output). The increment applied is defined by the
Count parameter (dBx10)
Increments / decrements a certain output ZONE current VOLUME. The increment
applied is defined by the Count parameter (dBx10)
Increments / decrements, in a certain output ZONE, the current GAIN for a certain
GRAPHICAL EQUALIZER band. The increment applied is defined by the Count
parameter (dBx10)