Ecler CA200Z Bedienungsanleitung Seite 52

ZONE_MUTE <Zone=ZA:ZD>
ZONE_VOL <Zone=ZA:ZD>
GEQ_ACTIVE <Zone=ZA:ZD>
GEQ_GAIN <Zone=ZA:ZD>
XOVER_ACTIVE <Zone=ZA:ZD>
XOVER_TYPE <Zone=ZA:ZD>
XOVER_FREQUENCY <Zone=ZA:ZD>
Gets the current MUTE status (ON or OFF) for the specified output
zone
Gets the current VOLUME for the specified output zone
Gets the current GRAPHICAL EQUALIZER status (ON or OFF) for the
specified output zone
<Band=B1:B10> Gets the current GAIN (dBx10) of one BAND (B1 to B10) of the
GRAPHICAL EQUALIZER for the specified output zone
Gets the current CROSSOVER FILTER status (ON or OFF) for the
specified output zone
Gets the current CROSSOVER FILTER TYPE (LP or HP) for the
specified output zone
Gets the current CROSSOVER FILTER FREQUENCY (Hz) for the
specified output zone
52