Ecler CA200Z Bedienungsanleitung Seite 62

FBS_ACTIVE <Input=I3:I6>
GATE_ACTIVE <Input=I3:I6>
GATE_THRESHOLD <Input=I3:I6>
GATE_DEPTH <Input=I3:I6>
GATE_ATTACK <Input=I3:I6>
GATE_HOLD <Input=I3:I6>
GATE_RELEASE <Input=I3:I6>
TALKOVER_ACTIVE <Input=I3:I6>
TALKOVER_MODE <Input=I3:I6>
TALKOVER_PRIORITY <Input=I3:I6>
TALKOVER_ZONES <Input=I3:I6>
TALKOVER_THRESHOLD <Input=I3:I6>
TALKOVER_DEPTH <Input=I3:I6>
TALKOVER_ATTACK <Input=I3:I6>
TALKOVER_HOLD <Input=I3:I6>
TALKOVER_RELEASE <Input=I3:I6>
Gets the current FEEDBACK SUPPRESSOR feature status (ON or OFF) for the
specified INPUT
Gets the current NOISE GATE status (ON or OFF) for the specified INPUT
Gets the current NOISE GATE THRESHOLD LEVEL (dBx10) for the specified
INPUT
Gets the current NOISE GATE DEPTH (attenuation when gate is closed, dBx10)
for the specified INPUT
Gets the current NOISE GATE ATTACK TIME (milliseconds x10) for the specified
INPUT
Gets the current NOISE GATE HOLD TIME (milliseconds x10) for the specified
INPUT
Gets the current NOISE GATE RELEASE TIME (milliseconds x10) for the specified
INPUT
Gets the current TALKOVER status (ON or OFF) for the specified INPUT
Gets the TALKOVER function working mode (PAGER or DUCKER) for the
specified INPUT
Gets the current TALKOVER PRIORITY level (LOW or HIGH) for the specified
INPUT
Gets the current TALKOVER assignment to outputs (ZONES) for the specified
INPUT
Gets the current TALKOVER THRESHOLD LEVEL (dBx10) for the specified
INPUT
Gets the current TALKOVER DEPTH (attenuation, dBx10) for the specified
INPUT
Gets the current TALKOVER ATTACK TIME (milliseconds x10) for the specified
INPUT
Gets the current TALKOVER HOLD TIME (milliseconds x10) for the specified
INPUT
Gets the current TALKOVER RELEASE TIME (milliseconds x10) for the specified
INPUT
62