Ecler CA200Z Bedienungsanleitung Seite 69

TYPE PARAM1
DATA INFO_MODEL
INFO_VERSION
AUTOLOAD_PRESET1
PRESET_NUMBER
PRESET_NAME
PRESET_DONE
REMOTE_MODE
REMOTE_INPUTS
REMOTE_ZONES
DISPLAY_MODE
LCD_CONTRAST
EXT_MUTE_ZONES
IN_LABEL
IN_STEREO
IN_MUTE
PARAM2 PARAM3
<DeviceModel>
<FirmwareVersi
on>
ON/OFF
<Preset=P1:P20
>
<Preset=T1:T9>
<Preset=P1:P20 "<Name>"
>
<Preset=T1:T9>
<Preset=P1:P20
>
<Preset=T1:T9>
<Remote=R1:R4 <RemoteMode>
>
<Remote=R1:R4 <Inputs=I1:I6>
>
<Remote=R1:R4 <Zones=ZA:ZD>
>
<DisplayMode>
<Contrast=0:10
0>
<Zones=ZA:ZD>
<Input=I1:I6> "<Label>"
<Input=I3:I6> ON/OFF
<Input=I1:I6> ON/OFF
PARAM4 DESCRIPCIÓN
Shows the Device model name
Shows the current Firmware Version
Shows the current AUTOLOAD_PRESET1 at Startup function
Shows the current PRESET number (active preset)
Shows a certain PRESET (from P1 to P20) or TEMPLATE (from T1 to
T9) name
Shows that the last SET LOAD_PRESET or SET PRESET_NUMBER
command has been processed: the preset is loaded and active
Shows the working mode for a certain REMOTE port (from R1 to R4)
Shows the list of inputs affected by the working mode of a certain
REMOTE port (from R1 to R4)
Shows the list of outputs affected by the working mode of a certain
REMOTE port (from R1 to R4)
Shows the current DISPLAY MODE
Shows the current DISPLAY CONTRAST level
Shows the list of outputs to be muted by an external contact closure,
connected to the MUTE port
Shows the current LABEL (name) for the specified INPUT
Shows the current STEREO link status (ON or OFF) for INPUTs 4 and
5
Shows the current MUTE status (ON or OFF) for the specified INPUT
69