Ecler CA200Z Bedienungsanleitung Seite 64

COMPRESSOR_KNEE <Zone=ZA:ZD>
COMPRESSOR_GAIN <Zone=ZA:ZD>
DELAY_ACTIVE <Zone=ZA:ZD>
DELAY_TIME <Zone=ZA:ZD>
Gets the current COMPRESSOR KNEE mode (SOFT or HARD) for the specified
output zone
Gets the current COMPRESSOR GAIN (dBx10) for the specified output zone
Gets the current DELAY status (ON or OFF) for the specified output zone
Gets the current DELAY TIME (milliseconds x10) for the specified output zone
64