Ecler CA200Z Bedienungsanleitung Seite 50

DISPLAY_MODE
LCD_CONTRAST
EXT_MUTE_ZONES
IN_LABEL <Input=I1:I5>
IN_STEREO <Input=I4:I5>
IN_MUTE <Input=I1:I5>
IN_VOL <Input=I1:I5>
IN_BASS <Input=I1:I5>
IN_MID <Input=I1:I5>
IN_TREBLE <Input=I1:I5>
HPF_ACTIVE <Input=I4:I5>
HPF_FREQUENCY <Input=I4:I5>
FBS_ACTIVE <Input=I4:I5>
GATE_ACTIVE <Input=I4:I5>
GATE_THRESHOLD <Input=I4:I5>
GATE_DEPTH <Input=I4:I5>
GATE_ATTACK <Input=I4:I5>
GATE_HOLD <Input=I4:I5>
GATE_RELEASE <Input=I4:I5>
Gets the current LCD DISPLAY MODE
Gets the current LCD DISPLAY CONTRAST level
Gets the outputs to be muted by an external contact closure,
connected to the MUTE port
Gets the current LABEL (name) for the specified INPUT
Gets the current STEREO link status (ON or OFF) for INPUTs 4 and 5
Gets the current MUTE status (ON or OFF) for the specified INPUT
Gets the current VOLUME for the specified INPUT (general input
volume, affecting all the post processing)
Gets the current BASS tone LEVEL for the specified INPUT
Gets the current MIDDLE tone LEVEL for the specified INPUT
Gets the current TREBLE tone LEVEL for the specified INPUT
Gets the current HIGH PASS FILTER status (ON or OFF) for the
specified INPUT
Gets the current HIGH PASS FILTER frequency (Hz) for the specified
INPUT
Gets the current FEEDBACK SUPPRESSOR feature status (ON or OFF)
for the specified INPUT
Gets the current NOISE GATE status (ON or OFF) for the specified
INPUT
Gets the current NOISE GATE THRESHOLD LEVEL (dBx10) for the
specified INPUT
Gets the current NOISE GATE DEPTH (attenuation when gate is
closed, dBx10) for the specified INPUT
Gets the current NOISE GATE ATTACK TIME (milliseconds x10) for the
specified INPUT
Gets the current NOISE GATE HOLD TIME (milliseconds x10) for the
specified INPUT
Gets the current NOISE GATE RELEASE TIME (milliseconds x10) for
the specified INPUT
50