Beyerdynamic Xelento wireless Kurzanleitung Seite 12

/
12 16
If the Bluetooth®connection has been lost,
the LED briefly flashes blue every 3
seconds.
Performing Google Fast Pair
9 Xelento wireless is switched off.
1. Press and hold the on/off
button for 6 seconds (
to start the pairing mode via
Bluetooth®.
Status LED slowly flashes
alternately blue and red.
2. In pairing mode, bring Xelento
wireless close to a Fast-Pair-enabled
smartphone.
3. Tap on Connect in the smartphone.
CHARGING
We recommend you use only the supplied
USB cable to charge the battery.
1. Using the USB charging cable supplied,
connect the in-ear headphones to any
standard-compliant live USB-A socket
(e.g. USB power supply).
2. Remove the USB charging cable after
charging.
LED display of charge level:
Flashing red:
Flashing yellow:
Flashing green:
Steady green:
Xelento wireless (2nd generation)
)
Battery 0–30 % full
Battery 30–70 % full
Battery 70–99 % full
Battery 100 % full