Connecting Via Bluetooth - Beyerdynamic Xelento wireless Kurzanleitung

Xelento wireless (2nd generation)
CONNECTING VIA BLUETOOTH®
(PAIRING)
Before you can use the in-ear headphones
for the first time, you must pair them with
your mobile phone or another Bluetooth®-
enabled device. The pairing procedure may
differ depending on the playback device.
Please refer to the corresponding operating
instructions of the playback device.
Pairing
9 Xelento wireless is switched off.
1. Press and hold the on/off
button for 6 seconds (
to start the pairing mode via
Bluetooth®.
Status LED slowly flashes
alternately blue and red.
2. Activate the Bluetooth® function on the
playback device and search for new
devices if necessary.
3. In the Bluetooth® menu of the playback
device, in the pairing list, select "Xelento
wireless (2nd gen.)" from the available
devices to connect the two devices.
After a successful connection, the status
LED briefly flashes blue every 7 sec. Each
time the device is switched on again, the
devices will connect as soon as they are
within range of each other.
)
11/16