Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
After-Sales Service
Before contacting the After-Sales Service:
1. See if you can solve the problem yourself with the help of
the suggestions given in the "What to do if ..." table.
2. Switch the appliance off and back on again it to see if the
fault persists.
If after the above checks the fault still occurs, contact IKEA
Authorized Service Centre.
Always specify:
•
a brief description of the fault;
•
the type and exact model of the appliance;
•
the service number (number after the word Service on the
rating plate)
•
your full address;
•
your telephone number.
If any repairs are required, please contact IKEA Authorized
Service Centre (to guarantee that original spare parts will be
used and repairs carried out correctly).
Technical Data
Product Dimension
Water connection
Water supply
Water tap
Minimum water supply pressure
Maximum water supply pressure
Voltage Rating [V / Hz / A]
Environmental concerns
Disposal of packaging materials
The packaging material is 100% recyclable and is marked with
the recycle symbol
.
The various parts of the packaging must therefore be disposed
of responsibly and in full compliance with local authority
regulations governing waste disposal.
Disposal of household appliances
This appliance is manufactured with recyclable or reusable
materials.
Dispose of it in accordance with local waste disposal regulations.
For further information on the treatment, recovery and recycling
of household electrical appliances, contact your local authority,
the collection service for household waste or the store where
you purchased the appliance. This appliance is marked in
compliance with European Directive 2012/19/EU, Waste Electrical
and Electronic Equipment (WEEE).
By ensuring this product is disposed of correctly, you will help
prevent negative consequences for the environment and human
health.
The symbol
on the product or on the accompanying
documentation indicates that it should not be treated as domestic
waste but must be taken to an appropriate collection center for the
recycling of electrical and electronic equipment.
XXXXXXXXXX
Width (mm)
Height (mm)
Depth (mm)
TRANSPORT AND HANDLING
Never lift the washing machine by holding it at the worktop.
1. Pull out the mains plug, and close the water tap.
2. Make sure that door and detergent dispenser are properly
closed.
3. Disconnect the inlet hose from the water tap, and remove
the drain hose from your draining point. Remove all rest
water from the hoses, and fix them so that they cannot get
damaged during transport.
4. Refit the transport bolts. Follow the instructions for
removing the transport bolts in the "Installation Guide" in
reverse order.
Do not transport the washing machine without having fixed
the transport bolts.
595
845 - 855
572
Cold
3/4" threaded hose connector
100 kPa (1 bar)
1000 kPa (10 bar)
220-240 V / 50 Hz / 10 A
18
Werbung
Inhaltsverzeichnis
