Maintenance And Care - Swarovski Optik ATX Interior Bedienungsanleitung

2.11 AFTER USING THE SPOTTING SCOPE
• Please put the protective cap for the objective lens back on.
• Additional protection with the SOC stay-on case
• Transport in two sections

3. MAINTENANCE AND CARE

3.1 LENS-CLEANING CLOTH
You can clean high sensitive lens surfaces with the enclosed special microfibre cloth.
It is suitable for objective lens, ocular lens and spectacles.
Please keep the cloth clean, as dirt can damage the lens surface. If the cloth becomes
soiled it can be washed in lukewarm soapy water and left to dry. Please only use for
cleaning lens surfaces!
3.2 CLEANING
We have designed all elements and surfaces to require little care.
26
ATX/STX / EN ATX/STX / DE
To ensure the optical brilliance of your spotting scope perma-
nently, you should keep its glass surfaces free of dirt, oil and
fat. When cleaning the lenses, first remove larger particles with
an optical lens brush. For the subsequent thorough cleaning
we recommend breathing onto the lens surface to form a coat
of condensation and then cleaning it with a soft, moist cloth.
The housing is best cleansed with a soft, moist cloth (don't use
the lens-cleaning cloth).
In the event of hard-to-remove dirt (e.g. sand) the eye cups can
be unscrewed and cleaned easily.
3.3 STORAGE
You should also store your spotting scope in a well-ventilated and dark place.
A wet spotting scope should be dried before storage.
In tropical regions or regions with a high humidity the best place to store the
instrument in is an air-tight receptacle along with a moisture-absorbing agent (e.g.
silica gel).
ATX/STX / EN ATX/STX / DE
27