Troubleshooting - Veratron VMH 35 MARINE DISPLAY Bedienungsanleitung

TROUBLESHOOTING

DATA DISPLAY
Problem
The values
displayed are not
as expected.
The value is not
displayed / Only
dashes displayed
INTERNAL GPS
Problem
The displayed speed is "--"
Root cause
Incorrect sensor
configuration.
Sensor connected
incorrectly.
The NMEA 2000 network
backbone has not been
created correctly.
Not available on the network.
Sensor not connected.
The NMEA 2000 network
backbone has not been
created correctly.
Root cause
GPS module in search state
(GPS search)
Check the configuration in the Sensors menu.
Check the connection, refer to the Installation
Instructions.
Check the connections and that there is a
termination at both the beginning and end of the
backbone.
Check that the sensor is functioning correctly.
Connect the sensor, refer to the
Instructions
.
Check the connections and that there is a
termination at both the beginning and end of the
backbone.
Wait. The search operation takes about
one minute, then the GPS is ready (GPS
valid).
TROUBLESHOOTING
Solution
Installation
Solution
B001167