Units Menu - Veratron VMH 35 MARINE DISPLAY Bedienungsanleitung

UNITS MENU

Setting
Speed
TRIP
Flow
Tank
Temperatures
Pressure
Depth
Note*: the underlined value/command is the default.
SET THE DAY/NIGHT MODE
To set the desired mode, act on pin 10 of the MX150 connector as follows:
To set the mode...
day
night
CHANGE THE BRIGHTNESS OF THE DISPLAY
The change affects the set day or night mode.
Description
Speed units
Unit of measurement of distance travelled
Flow measurement units ...
Unit of measurement of the liquid in the tank
Temperature units
Pressure units
Depth measurement units
Then...
move the pin switch to GND/OPEN.
move the pin switch to BATTERY PLUS.
GENERAL SETTINGS
Possible
values/commands*
Km/h / mph/ kts
km / mile / nm
L/h / gph
L/ US gal
°C/ °F
bar/ PSI
m / ft
B001167