SUPAIR DELIGHT 4 Benutzerhandbuch Seite 59

Harness user's manual | DELIGHT 4
ANNEX
STORAGE, TRAN AND MAINTENANCE
Store your equipment in a dry state in a dry place protected from
daylight at normal environmental temperatures (-10° to +30°C) where it
is free of any mechanical compression, pressure or tensile load. Store
the equipment away from chemicals, and away from an acidic or saline
atmosphere. Avoid ongoing vibrations. Use the protective bag or special
storage and tran containers with non-metallic bottoms (to prevent
contact corrosion).
CLEANING
Clean dirty COBRA® components in lukewarm water (if necessary using
neutral soap). Rinse them well. Dry at room temperature, never in an
electric dryer or near electric radiators. Use only approved household
disinfection liquids not any containing halogen as needed.
The joints of all metal parts must be relubricated with a dry lubricant
regularly, particularly following cleaning (such dry lubricants perform
their lubricating function even when in a dry state so that no dust or dirt
can cling to it).
If the instructions for use are not heeded, life threatening dangers
can result. Printing errors and omissions, as well as technical changes,
are ruled out.
ANSI test carried out be UL LLC.
© AUSTRIALPIN GmbH
01/2019, Subject to printing errors and technical changes.
AUSTRIALPIN®
and COBRA® are registered trademarks.
SUPAIR | DELIGHT 4| page 59
Revision index: V1 25/08/2022