SUPAIR DELIGHT 4 Benutzerhandbuch Seite 19

Harness user's manual | DELIGHT 4
Installing speedbar :
For each side of the harness:
Fold the tip of the speedbag to acces the footplate.
1
2
Pass the string through the footplate passers-by.
3
Attach each string with a knot .
4
Pass the strings in the guide rings at each side of the seat.
1
5
Warning: make sure that the speedbar is not set too short. It could be dangerous. When you do not use the speedbar, the string should
not be stretched at the risers.
Revision index: V1 25/08/2022
2
6
ACCESSORIES ASSEMBLY
Pass the speedbar's string through the pulley on the side fabric of
5
the harness as close to the seat as possible.
Pass the string through the welt opening on the side fabric of the
6
speedbag.
Finally, attach the split hooks in order to connect the speedbar
7
system to your glider.
3
7
4
8
Verify the proper functioning of
the speedbar by simulating the
acceleration, that is to say by sliding
out the string
SUPAIR | DELIGHT 4| page 19