Bumpair Delight 4 Shock Absorber - SUPAIR DELIGHT 4 Benutzerhandbuch

Harness user's manual | DELIGHT 4
The harness you have just purchased has a AIRBAG type shock absorber. This protection is intended to protect you against potential impacts.
It complies with EU Regulations 2016/425 relating to personal protective equipment (PPE) and certified by expert following protocol CRITT-SP SL-003
09/2021.
The shock absorber UE conformity of your harness is certified by the following laboratory: ALIENOR CERTIFICATION n°2754 ,Z.A. du Sanital, 21 Rue
Albert Einstein, 86100 Chatellerault, FRANCE. The test reports and the EU Declaration of Conformity are available at:
The storage, tran and maintenance of the AIRBAG is the same as it is for the harness. The inspection of the protector is the same as it would be for
the harness.
Please note that no shock absorber can guarantee total protection against injury. The back protector does not prevent potential injuries to
the spine and/or pelvis. In addition, only the parts of the body covered by the shock absorber are likely to benefit from adaquate protection
against possible impacts.
Please note that the performance of the equipment can be dangerously affected by any modification
made or improper use of the shock absorber, and negatively affect the proper functionality
of the protector which must be whole and properly installed. You must check that all
is in order prior each flight:
1 / The correct shape and inflation of the AIRBAG/shock absorber.
2 / The AIRBAG seams and overall condition of the fabrics - look for holes, tears, snags ....
The protection can have a five (5) year lifespan under normal use conditions.
Warning! Following a major hard landing the protector can be damaged.
Revision index: V1 25/08/2022

BUMPAIR DELIGHT 4 shock absorber

supair.com/telechargements/
SUPAIR | DELIGHT 4| page 52