SUPAIR DELIGHT 4 Benutzerhandbuch Seite 25

Harness user's manual | DELIGHT 4
One (1) square 7mm Maillon Rapide® will be needed + two (2) flexible toric rings.
1
- Open the 7mm square Maillon
Rapide®
- Push the maillon through the risers
loops
- Push the maillon through the plastic
ring
- Twist
Make sure the final position is similar to the following illustration:
Revision index: V1 25/08/2022
INSTALLING THE RESERVE PARACHUTE
2
- Push the two riser ends
through the toric ring loop.
- Push the maillon through the
riser loop.
4
3
- Give a second twist to the
plastic ring.
- Push the buckle through the
maillon.
5
- Tidy up the assembly.
- Be certain for the riser end loops
to be securely fastened.
- Close the Maillon Rapide®
tightly by hand.
- Tighten using pliers and making
a ¼ turn.
SUPAIR | DELIGHT 4| page 25