SUPAIR DELIGHT 4 Benutzerhandbuch Seite 57

Harness user's manual | DELIGHT 4
MATERIALS
Body: aluminum
Rivets, adjuster bar, integrated D-Ring: stainless steel
Clips: brass
Anti slide part: polymer
Material exceptions:
• item no. starts with «FI": stainless steel body
• item no. starts with «FT": steel body
• item no. contains «VA4": 100% stainless steel
• adjuster bar COBRA® FM and COBRA® FZ:
aluminum
• adjustment valve SUPER COBRA®: aluminum
COMBINATION; USING TOOLS AS A SYSTEM; COMPATIBILITY
By combining this component with others, the safety features of each
component can interfere with each other. Assure yourself of their
compatibility. An incorrect combination of components can bring
about unintended and unforeseeable dangers, in which case the
safe functioning of a given component is no longer guaranteed. The
compatibility of connecting components and harness straps must be
ensured by the harness manufacturer. The operating instructions
of each product must be heeded carefully, in particular those of the
catching system, of which this connecting component forms one part.
SIZE
Use the COBRA® components only with
corresponding harnesses. A tolerance of ± 3 mm is
webbing size of the component name (as designated on the delivery
note or invoice) or request this information at office
INCORPORATION IN THE HARNESS SYSTEM
a)Make allowance for the correct position of the harness component
in its closed state. The upper side must be the side turned away
Revision index: V1 25/08/2022
from the body. You can recognize the upper side from the lettering
AUSTRIALPIN and/or COBRA®. b) For COBRA® components
with adjuster bar or middle bridge only: Make sure the strap is
correctly threaded through the adjustment mechanism. If the
functioning of the harness system permits, sew the end of the strap in
such a way that it is impossible to become unthreaded (see illus. 7).
c) For multiple-part COBRA® components only: The individual
parts must be ordered in the correct way so that when
connecting, each upper part is turned away from the body.
THINGS TO CHECK BEFORE, DURING AND AFTER EACH USE
Make sure that the COBRA® component has no cracks, deformations,
fractures, fissures or signs of corrosion and that all components are
firmly attached to each other.
FOR COBRA® BUCKLES (CLICK-CLOSURES) ONLY
Make sure that the male part and the female part belong to the
same component group. (table 1) Check the riveting and the perfect
functioning of the clips. Make sure that the buckle closes tightly and
securely. Ensure both before and during usage that the buckle is
correctly closed. Combine only COBRA® Buckles with the same
type; for example FY with FY; FX with FX, FT with FT, etc. Do not use
COBRA® components marked with -OUL (open under load) for PPE
products.
XPERT CHECK
Quite apart from continuous checking before and during use, the
COBRA® components and the overall product must be checked, tested
@
austrialpin.at. and verified at least once annually by a professional. The product
should ideally be used only by one person so that the overall history
of the product usage is know. Record the date of its first use. In case
products are used by several persons, we recommend a systematic
checking and documentation before and after each use.
ANNEX
SUPAIR | DELIGHT 4| page 57