Declaration Of Conformity - Berkel HOME LINE PLUS-Serie Gebrauchsanleitung

DESCRIPTION
Electrical slicer machine for
home use with circular blade,
designed solely to slice food
products of the types and
within the dimensional limits
indicated in this manual. The
main parts that make up this
machine are illustrated in fig-
ure 1. Electrical diagrams are
reported in Fig. 2.
DECLARATION OF
CONFORMITY
The machines described in this
manual comply with 2006/95/
CE, 2004/108/CE,
UE, 2011/65/CE, with Europe-
an Regulation (EC) 1935/2004
and with relative standards
such EN60204-1, EN60335-1,
EN60335-2-14.
SAFETY
Please observe the following
instructions for your safety:
- carefully read all instructions
before using the machine;
- the product is not intended
to be used by children;
- use the machine only if you
have been properly trained
and are in perfect psychologi-
cal and physical condition;
- do not use the machine in
any way other than as de-
scribed in this manual;
- install the machine in con-
formity to the instructions
indicated in the "Installation"
section;
- install the machine in a loca-
tion out of the reach of person-
nel unauthorised to operate it;
- stay highly concentrated
when using the machine and
avoid any distraction during use;
- do not allow the machine
to be used by personnel who
have not read and fully com-
prehended the content of this
manual;
- do not wear baggy clothing
or clothing with open sleeves;
- do not allow anyone besides
the operator to approach dur-
ing product cutting operations;
- do not remove, cover or mod-
ify the tags located on the
machine body and, in case
of damage of these, replace
them promptly;
- do not remove the protec-
tions and do not modify or by-
pass the mechanical and elec-
trical protective devices;
- slice only
products. Do not attempt cuts
on prohibited type products;
- always keep the sliced prod-
uct resting surface, the work
2012/19/ area all around the machine
and the operator floor area
clean and dry;
- do not use the machine as
a resting surface and do not
place any objects on it which
are foreign to normal cutting
operations;
- do not use the slicer when,
due to normal wear, the dis-
tance between the edge of the
blade and the blade protec-
tion exceeds 5 mm;
- in this case, contact the man-
ufacturer or an Authorised
Service Centre to change the
blade;
- do not use the machine with
"movable" type electrical con-
nections, with temporary or
non insulated cables;
- periodically check the con-
dition of the power cable and
the cable gland on the ma-
chine body. Replace it prompt-
ly when necessary, requesting
operation by qualified person-
nel;
- immediately stop the ma-
chine in the event of a defect,
abnormal operation, suspicion
of breakdown, incorrect move-
ment, unusual noises;
- before cleaning or carrying
out maintenance, disconnect
the machine from the electri-
cal mains;
- use protective gloves for the
cleaning and maintenance op-
erations;
the permitted
15
- place and remove the goods
to be sliced on the sliding
meat table only with the car-
riage completely pulled back
and with the thickness adjust-
ment lever placed in the safety
position (Fig. A);
- for movement of the meat ta-
ble during cutting operations
use only the manoeuvring
handle located on the arm or
the product holder grip;
- use of cutting accessories
which were not provided by
the manufacturer with the ma-
chine is prohibited;
- the device cannot be used
without the meat table or
product holder.
The manufacturer declines any
direct and indirect responsi-
bility stemming from inappro-
priate use, unauthorised mod-
ifications and/or repair carried
out on the machine, or use of
non original accessories and
replacement parts.
The machine may not be used
in open areas and/or areas
which are exposed to atmos-
pheric agents and in environ-
ments with vapours, fumes or
corrosive and/or abrasive pow-
ders, with risk of fire or explo-
sion and in any case where the
use of anti-explosive compo-
nents is required.
Environmental conditions of
use:
- Temperature
from -5°C to +40°C
- Max. humidity 95%
DO NOT SLICE:
- frozen food products;
- deep frozen food products;
- any other product not intend-
ed for food use.
!
WARNING! The motor
may overheat! After 15
minutes of continuous use,
switch off the machine and let
the motor cool.
The blade can sever parts of
the body. For this reason, never