Personal Safety - Meec tools 019199 Bedienungsanleitung

• Avoid body contact with earthed surfaces such as pipes,
radiators, cookers and refrigerators. There is an increased
risk of electric shock if your body is earthed.
• Do not expose power tools to rain or moisture. There is a
greater risk of electric shock if water gets into a power tool.
• Be careful with the power cord. Never use the power cord to
carry or pull the tool, or to pull out the plug from the mains
socket. Keep the power cord away from heat, oil, sharp
edges and moving parts. Damaged or tangled power cords
increase the risk of electric shock.
• If using the tool outdoors, only use an extension cord
approved for outdoor use. Cords intended for outdoor use
reduce the risk of electric shock.
• If it is absolutely necessary to use power tools in damp
conditions, use a mains connection protected by a residual
current device (RDC). Using an RCD reduces the risk of
electric shock.

PERSONAL SAFETY

• Stay alert. Pay attention to what you are doing, and use your
common sense when working with power tools. Never use
power tools if you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention or
carelessness can result in serious personal injury.
• Use personal safety equipment. Wear safety glasses or a face
mask. Depending on the type of tool and how it is used,
safety equipment such as dust masks, non-slip safety shoes,
safety helmets and ear protection reduce the risk of personal
injury.
• Avoid accidental starting. Check that the power switch is in
the OFF position before plugging in the plug or battery, or
lifting/carrying the tool. Carrying a power tool with your
EN
43