Introduction; Device Description; Scope Of Delivery - Scheppach MBS1200 Original Bedienungsanleitung

1.

Introduction

Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope your new tool brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability
laws, the manufacturer of this device assumes no lia-
bility for damage to the device or caused by the device
arising from:
• Improper handling,
• Failure to comply with the operating instructions.
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts,
• Application other than specified,
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
13 / VDE0113 not being observed.
Please consider:
Read through the complete text in the operating manu-
al before installing and commissioning the device.
This operating manual should help you familiarise
yourself with your power tool and teach you how to use
it for its intended purpose.
The operating manual include important instructions
for the safe, proper and economic operation of the
power tool, for avoiding danger, for minimising repair
costs and downtimes and for increasing the reliability
and extending the service life of the power tool.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the power tool in your country.
Keep the operating manual package with the power
tool at all times and store it in a plastic cover to pro-
tect it from dirt and moisture. They must be read and
carefully observed by all operating personnel before
starting the work.
The power tool may only be used by personnel who
have been trained to use it and who have been in-
structed with respect to the associated hazards.
The required minimum age must be observed.
26 | GB
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.

2. Device description

1. Handle
2. Motor
3. LED on/off switch
3.1. LED
4. Speed setting wheel
5. On/off switch
6. Release switch
7. Handle
8. Mains connection
9. Saw band guard (left/right)
10. Workpiece stop
11. Saw band
12. Metal band saw holes
13. Tightening lever for saw band
14. Top saw band guard
15. Carbon brushes
16. Saw band drive unit
17. Rubber belts
18. Guide rollers
19. Support arm
20. Support arm holes
21. Saw table
22. Support arm base plate
23. Fixed clamping jaw
24. Moving clamping jaw
25. Workpiece clamping lever
26. Locking handle (graduated scale)
27. Safety bolt

3. Scope of delivery

• Metal band saw
• Saw table
• 3x hexagon socket screws
• 1x hexagon socket screw + nut
• 2x Allen key
• 2x saw bands
• Original Operating Manual
www.scheppach.com