Husqvarna 122C Bedienungsanweisung Seite 16

1. Remove the air filter cover and remove the air filter.
2. Clean the air filter with warm soap water. Make sure
that the air filter is dry before you install it.
3. Replace the air filter if it is too dirty to fully clean it.
Always replace a damaged air filter.
4. If your product has a foam air filter, apply air filter oil.
Only apply air filter oil to a foam filter. Do not apply
oil to a felt filter.
To apply air filter oil to the air filter
CAUTION:
Always use special air filter
oil on foam air filters. Do not use other types
of oil.
WARNING:
body.
1. Remove the air filter cover and remove the air filter.
16
Do not get oil on your
2. Put the air filter in a plastic bag.
3. Put the air filter oil in the plastic bag.
4. Push the plastic bag to make sure the oil supplies
equally across the air filter.
5. Push on the air filter, while in the bag, to remove
the air filter oil that is not necessary. Remove the air
filter from the bag.
6. Install the air filter.
To add grease to the bevel gear
• Make sure that the bevel gear is filled ¾ full with
bevel gear grease.
941 - 008 - 24.06.2022