Troubleshooting; Transportation And Storage - Husqvarna 122C Bedienungsanweisung

The engine does not start
Check Possible cause
Starter pawls. The starter pawls cannot move freely.
Fuel tank. Incorrect fuel type.
Spark plug. The spark plug is dirty or wet.
The spark plug electrode gap is incorrect.
The spark plug is loose.
The engine starts but stops again
Check Possible cause
Fuel tank Incorrect fuel type.
Air filter The air filter is clogged.
• Always allow the product to cool down before
storage.
• For storage and transportation of the product and
fuel, make sure that there are no leaks or fumes.
Sparks or open flames, for example from electrical
devices or boilers, can start a fire.
• Always use approved containers for storage and
transportation of fuel.
• Empty the fuel before transportation or before long-
term storage. Discard the fuel at an applicable
disposal location.
941 - 008 - 24.06.2022

Troubleshooting

Transportation and storage

•
•
•
•
Procedure
Remove the starter cover and clean around
the starter pawls.
Let an approved servicing dealer help you.
Drain the fuel tank and fill with correct fuel.
Make sure that the spark plug is dry and
clean.
Clean the spark plug. Make sure that the
electrode gap is correct. Make sure that the
spark plug has a supressor.
Technical data on page 18 for cor-
Refer to
rect electrode gap.
Tighten the spark plug.
Procedure
Empty the fuel tank and fill it with correct fuel.
Clean the air filter.
Attach the transport guard during transportation and
storage.
Remove the spark plug cap from the spark plug.
Attach the product during transportation. Make sure
that it cannot move.
Clean and do servicing on the product before long-
term storage.
17