Product Details; Installation Instructions; Transport And Unpacking - Fagor Evo Concept Installations-, Gebrauchs- Und Wartungsanleitung

3 PRODUCT DETAILS

The machine which you have just purchased is specially designed for cleaning tableware, glassware and
other items of kitchenware, used in the hotel and catering sector. As it is an industrial product, it is
characterised for having a high dish washing capacity.
All the appliances have a specifications plate which identifies the appliance and indicates its technical
characteristics; it is located on one side of the machine. Don`t remove the specifications plate from the unit.
SPECIFICATIONS PLATE
1: NAME OF APPLIANCE
2: APPLIANCE CODE
3: SERIAL NUMBER + DATE OF
MANUFACTURE
4: ELECTRICAL SPECIFICATIONS
5: WATER SPECIFICATIONS
These details should be quoted when the technical service is called.

4 INSTALLATION INSTRUCTIONS

The placement, installation, repairs and/or modifications must always be
carried out by an authorised technician in accordance with the manufacturer's
instructions and the applicable regulations.
Any installations, adjustments or repairs carried out by unauthorised
personnel, incorrect maintenance or use, the use of spare parts other than
those supplied by the manufacturer and any other type of alteration to the
appliance may cause damage or injury and result in loss of cover under the
warranty.
THE MANUFACTURER MAY NOT BE HELD LIABLE FOR ANY PROPERTY
DAMAGE OR PERSONAL INJURY RESULTING FROM THE INCORRECT
INSTALLATION, USE, MAINTENANCE OR REPAIR, OR CAUSED BY FAILURE
TO COMPLY WITH THE STANDARDS AND INSTRUCTIONS PROVIDED.

4.1 Transport and Unpacking

The machine should be carried to the place of installation using a fork-lift truck or similar to avoid damage
to the structure. First take the machine to the place of installation, then remove packaging and protective
film.
Packaging must not be left in the reach of children, it is a potential hazard.
Check the machine for damage during transportation. If any damage is observed, immediately notify the
supplier and the transport company. In the event of doubt, do not use the machine.
The packaging for this product is made from recyclable materials (wooden pallet,
cardboard, polypropylene band, expanded polyethylene...). Correct disposal of these
materials will contribute to the conservation of the environment. Dispose of these materials
in accordance with current legislation.
61