Product Details; Installation Instructions; Transport And Unpacking - Fagor CCO-320ICW Installations-, Gebrauchs- Und Wartungsanleitung

EN

3 PRODUCT DETAILS

The machine which you have just purchased is specially designed for cleaning tableware, glassware and
other items of kitchenware, used in the hotel and catering sector. As it is an industrial product, it is
characterised for having a high dish washing capacity.
All the appliances have a specifications plate which identifies the appliance and indicates its technical
characteristics, it is located on one side of the machine. Don`t remove the specifications plate from the unit.
SPECIFICATIONS PLATE
1: NAME OF APPLIANCE
2: APPLIANCE CODE
3: SERIAL NUMBER + DATE OF
MANUFACTURE
4: ELECTRICAL SPECIFICATIONS
5: WATER SPECIFICATIONS
These details should be quoted when the technical service is called.
In machines composed of several modules you will
find a nameplate with a mark indicating the total
electrical values of the device, in order to size the
electrical connection.
If a module is added to the device, the new
configuration must be indicated.
The operating electrical configuration of the machine must always be shown in the plate and the electrical
connection must be adapted and correctly sized to this configuration.

4 INSTALLATION INSTRUCTIONS

THE MANUFACTURER MAY NOT BE HELD LIABLE FOR ANY PROPERTY
DAMAGE OR PERSONAL INJURY RESULTING FROM THE INCORRECT
INSTALLATION, USE, MAINTENANCE OR REPAIR, OR CAUSED BY FAILURE
TO COMPLY WITH THE STANDARDS AND INSTRUCTIONS PROVIDED.

4.1 Transport and Unpacking

The machine should be carried to the place of installation using a fork-lift truck or similar to avoid damage
to the structure, all of the base of the it must be totally parallel and level. First take the machine to the place
of installation, then remove packaging and protective film.
66
The placement, installation, repairs and/or modifications must always be
carried out by an authorised technician in accordance with the manufacturer's
instructions and the applicable regulations.
Any installations, adjustments or repairs carried out by unauthorised
personnel, incorrect maintenance or use, the use of spare parts other than
those supplied by the manufacturer and any other type of alteration to the
appliance may cause damage or injury and result in loss of cover under the
warranty.
If a transformation is made in the machine and the
alternating heating connection is modified, from
alternate to simultaneous, the dataplate supplied
with the machine must be used, indicating the new
configuration and sticking it on the device together
with the others, protecting it with the transparent
sticker.