Setting Up The Device; Quick Overview - Dometic BUTTNER MT iQ Basic Pro Montage- Und Bedienungsanleitung

MT iQ Basic Pro
9

Setting up the device

9.1

Quick Overview

No. in
fig. 2,
Description
page 4
1 Push button
2 Display
3 Battery measurements and calculated values
I
NOTE
The battery type and nominal battery capacity are required for the correct calculation
of the remaining capacity and remaining running time.
The device is automatically detected the operational voltage (12V or 24V).
9.2 Battery type selection
1. Push and hold the button (fig. 2 , 1) for 5 seconds to enter the setup menu.
2. Push the button to navigate in the setup menu.
3. Select the BatTyp and push and hold the button for 5 seconds to adjust the battery type.
4. Push the button to select the correct battery type.
Pb Lead acid battery
Gel Gel battery
AGM AGM battery
LiFePO4 Lithium battery
5. Wait for about 10 seconds.
✔ The battery type is stored.
9.3 Battery capacity selection
1. Push and hold the button (fig. 2 , 1) for 5 seconds to enter the setup menu.
2. Push the button to navigate in the setup menu.
3. Select the BatCap and push and hold the button for 5 seconds to adjust the battery capacity.
4. Push the button to select the nominal battery capacity.
EN
Setting up the device
11