2) Pull off the drive unit lid u.
NOTE
Ensure that the rotary switch 3 is set to the
►
"0" position before fi tting the blender onto
the drive unit. Otherwise, the appliance will
start automatically as soon as the blender is
locked in.
3) Place the blender t onto the blender drive
unit o so that the locking mechanisms on the
bottom of the blender t fi t into the recesses
in the blender drive unit o. The arrow on the
blender t must point to the
the appliance. Rotate the blender t clockwise
as far as it will go. The arrow on the blender t
will then point to the
4) Add the ingredients.
5) Place the blender lid r with measuring cup e
onto the unit, making sure that the lip on the
lid r seals the spout.
6) Turn the rotary switch 3 to the required setting.
NOTE
►
The optimal speed depends on the consistency
of the food to be processed. More liquid
contents can be blended faster.
►
For short, powerful pulses, set the rotary
switch 3 at least to level 1 and simultane-
ously press the PULSE button 4. The PULSE
button 4 does not lock, in order to avoid
overloading the drive. Therefore, hold the
PULSE button 4 in this position only for a
short period.
SKMP 1300 B3
All manuals and user guides at all-guides.com
symbol on
symbol on the appliance.
Adding more ingredients
1) Switch the appliance off using the rotary
switch 3.
2) Remove the blender lid r and insert the
ingredients.
or
3) Rotate the measuring cup e situated within the
blender lid r 90° and remove it. Then gradu-
ally add the ingredients using the opening.
After you have fi nished using your
appliance
1) Switch the appliance off using the rotary
switch 3.
2) Rotate the blender t anticlockwise until the
arrow on the blender t points to the
symbol on the appliance, then remove it.
NOTE
Ideally, you should clean the blender t im-
►
mediately after use (see the section "Cleaning
and care"). This makes food residues easier
to remove.
Cleaning and care
DANGER – ELECTRIC SHOCK!
►
Before cleaning the appliance, disconnect
the power plug from the mains power socket!
There is a risk of electric shock!
NEVER immerse the appliance in water or
any other liquid!
CAUTION! PROPERTY DAMAGE!
►
Do not use abrasive or aggressive cleaning
materials. These may damage the surfaces
of your appliance.
GB │ CY
│
9
■