Adding More Ingredients; After You Have Finished Using Your Appliance; Cleaning And Care - Silvercrest SKMP 1300 B3 Bedienungsanleitung

2) Pull off the drive unit lid
NOTE
► Ensure that the rotary switch
"0" position before fitting the blender onto
the drive unit. Otherwise, the appliance will
start automatically as soon as the blender is
locked in.
3) Place the blender
unit so that the locking mechanisms on the
bottom of the blender
in the blender drive unit
blender must point to the
the appliance. Rotate the blender
as far as it will go. The arrow on the blender
will then point to the
ance.
4) Add the ingredients.
5) Place the blender lid
onto the unit, making sure that the lip on the
lid seals the spout.
6) Turn the rotary switch
NOTE
► The optimal speed depends on the consistency
of the food to be processed. More liquid
contents can be blended faster.
► For short, powerful pulses, set the rotary
switch at least to level 1 and simultane-
ously press the PULSE button
button does not lock, in order to avoid
overloading the drive. Therefore, hold the
PULSE button in this position only for a
short period.
SKMP 1300 B3
.
is set to the
onto the blender drive
fit into the recesses
. The arrow on the
symbol on
clockwise
symbol on the appli-
with measuring cup
to the required setting.
. The PULSE

Adding more ingredients

1) Switch the appliance off using the rotary
switch .
2) Remove the blender lid
ingredients.
or
3) Rotate the measuring cup
blender lid 90° and remove it. Then gradu-
ally add the ingredients using the opening.
After you have finished using your
appliance
1) Switch the appliance off using the rotary
switch .
2) Rotate the blender
arrow on the blender
symbol on the appliance, then remove it.
NOTE
► Ideally, you should clean the blender
mediately after use (see the section "Cleaning
and care"). This makes food residues easier
to remove.

Cleaning and care

DANGER – ELECTRIC SHOCK!
► Before cleaning the appliance, disconnect
the power plug from the mains power socket!
There is a risk of electric shock!
NEVER immerse the appliance in water or
any other liquid!
CAUTION! PROPERTY DAMAGE!
► Do not use abrasive or aggressive cleaning
materials. These may damage the surfaces
of your appliance.
and insert the
situated within the
anticlockwise until the
points to the
im-
57
GB
MT