Trouble Shooting; Fault Correction - Parkside PNTS 1400 E2 Originalbetriebsanleitung

GB

Trouble shooting

Problem
Device does not start
Low or lack of suction
Float does not switch
the appliance off
Dust or dirt is blow out
of the device
14
All manuals and user guides at all-guides.com
Possible cause
Mains voltage is not
present
Defective on/off switch
( 6)
Worn carbon brushes
Defective motor
Hose system (
( 25/26) blocked
Suction pipe (
assembled incorrectly
Container (
Container (
Filter ( 21/23/24) full
or clogged
Float in the filter basket
( 27) does not move
Float in the filter basket
( 27) faulty
Float in the filter basket
( 27) does not move
Float in the filter basket
( 27) faulty
Filter ( 21/23/24) is not
or not correctly assembled

Fault correction

Check plug socket, cable,
line, plug and fuse, where
appropriate, repair through
electrical specialist
Repair by Customer Care
19) or jets Remove obstructions and
blockages
17)
Assemble suction pipe correctly
Close container
9) open
Empty container
9) full
Empty, clean or replace filter
Release float
Repair by Customer Care
Release float
Repair by Customer Care
Use missing filters or check the
correct position of the filter