Commissioning And Operation - Kärcher k 7.960 m Betriebsanleitung

Safety Devices
Safety devices prevent injury and may not
be modified or bypassed.
Unit switch
The switch prevents unintended starting of
the appliance. Stop the appliance during
breaks or after operation.
Safety catch
The safety catch on the handgun prevents
the appliance from being switched on unin-
tentionally.

Commissioning and operation

Definition of abbreviations used:
HP = High pressure
DT = Detergent
Description of the Appliance
When unpacking the product, make sure
that no accessories are missing and that
none of the pakkage contents have been da-
maged. If you detect any transport dama-
ges, please contact your dealer.
Illustrations on Page 2
1 ON/OFF switch for appliance
2 Power cord with plug
3 HP outlet
4 HP hose
5 Handgun with safety catch
6 Connection for water supply with filter
7 Coupling unit
8 DT tank
9 Accessory mount
10 Handle
11 Spray lance with Variopower nozzle
12 Spray lance with dirt blaster
13 Washing brush
Initial start-up
When the appliance is delivered, the HP
hose and handgun are not attached, this
prevents buckling. Please mount these be-
fore using the appliance for the first time.
Push out the safety clip in the handgun
using e.g. a small screwdriver.
Join HP hose and handgun together.
Push clip in until it engages and check
that it is securely fastened by pulling on
the HP hose.
Remove cable tie and unroll HP hose
Water supply
Water supply from mains
For connection values, see type plate/tech-
nical data.
Observe regulations of water supplier.
Use a fibre-reinforced hose (not inclu-
English 13