Scheppach TBT19Vario Original Bedienungsanleitung Seite 49

• Store unused power tools in a safe place. The storage place
should be dry and lockable. This prevents the power tool from
being damaged as a result of being stored or operated by inexperi-
enced people.
• Never leave the tool before it has come to a complete standstill.
After running bits can cause injury.
• Do not use the power tool with a damaged cable. Do not touch
the damaged cable and pull the mains plug if the cable is dam-
aged while working. Damaged cables increase the risk of electric
shock.
Attention: Laser radiation
Do not look into the beam
Laser class 2
Protect yourself and you environment from accidents using suita-
ble precautionary measures!
• Do not look directly into the laser beam with unprotected eyes.
• Never look into the path of the beam.
• Never point the laser beam towards reflecting surfaces and persons
or animals. Even a laser beam with a low output can cause damage
to the eyes.
• Caution - methods other than those specified here can result in dan-
gerous radiation exposure.
• Never open the laser module. Unexpected exposure to the beam
can occur.
• If the mitre saw is not used for an extended period of time, the bat-
teries should be removed.
• The laser may not be replaced with a different type of laser.
• Repairs of the laser may only be carried out by the laser manufactur-
er or an authorised representative.
 www.scheppach.com /  service@scheppach.com /  +800 4002 4002
GB | 49