Scheppach TBT19Vario Original Bedienungsanleitung Seite 46

• Avoid abnormal posture
- Make sure that you have secure footing and always maintain your
balance.
• Take care of your tools
- Keep cutting tools sharp and clean in order to be able to work better
and more safely.
- Follow the instructions for lubrication and for tool replacement.
- Check the connection cable of the electric tool regularly and have it
replaced by a recognised specialist when damaged.
- Check extension cables regularly and replace them when damaged.
- Keep the handle dry, clean and free of oil and grease.
• Pull the connector out of the socket
- When the power tool is not in use, before maintenance and when
changing tools such as saw blades, drill bits, cutters.
• Do not leave a tool key inserted
- Check, before switching on, that keys and adjusting tools have been
removed.
• Avoid inadvertent starting
- Make sure that the switch is switched off when plugging the plug into
an outlet.
• Use extension cables for outdoors
- Only use approved and appropriately identified extension cables for
use outdoors.
• Remain attentive
- Pay attention to what you are doing. Remain sensible when working.
Do not use the electric tool when you are distracted.
• Check the electric tool for potential damage
- Protective devices or other parts with minor damage must be care-
fully inspected to ensure that they function correctly and as intended
prior to continued use of the electric tool.
- Check whether the moving parts function faultlessly and do not jam
or whether parts are damaged. All parts must be correctly mounted
and all conditions must be fulfilled to ensure fault-free operation of
the electric tool.
46 | GB
 www.scheppach.com /  service@scheppach.com /  +800 4002 4002