1
1. Product information
Fig. 1
Carrier rail AZURA® Click
The carrier rail AZURA® Click is intended for mounting the following
devices:
Interface box (AZB00XA)
Pressure control (AZG10)
AZURA pH sensor (A70091-2)
AZURA Organizer (A70085)
Distribution box (AZS80SA)
Air sensor (A70092-1, A70093-1, A70083-1)
2. Attaching AZURA® Click
Note:
Do not mount the carrier rail over the ventilation grille.
Tool:
Prerequisite:
Measuring instrument with millimeterscale for linear
measurement (e. g. folding rule, ruler, ect.)
The tubular film has been removed.
The end caps are attached.
The side panel is clean, dry, and free from dust and
grease.
AZURA® Click Supplement, V6711