Handlebar Adjustment - Zipro Boost Gold Bedienungsanleitung

EN
6. Install the computer
Connect the heart rate measurement cables (28)
and the computer cable pulled from the
handlebar column to computer cables (24).
Fix the computer (24) to the computer bracket
on the handlebar column (17) with cross-head
bolts (21).
7. Install the water bottle holder
Install the water bottle holder (43) on the
handlebar column (17) using the bolt (45) and
the flat washer (46). Make sure the holder is
secure and insert the bottle.
Congratulations! You have assembled
magnetic bike!
Read the manual carefully before using the
bicycle.
ADJUSTMENTS
Resistance adjustment
In order to increase the resistance, turn the resistance knob clockwise. In order to decrease the
resistance, turn the resistance knob counterclockwise.

Handlebar adjustment

Loosen the handlebar adjustment knob. Set the handlebar in the desired position and tighten the
knob. Make sure the handlebar is secured.
Saddle height
Loosen the adjustment knob. Set the saddle at the right height and tighten the knob. Make sure the
saddle is secured.
Saddle position
Loosen the saddle guide knob. Set the saddle to the desired position and tighten the knob. Make
sure the saddle is secured.
Adjusting pedal straps
Fix the side of the rubber strap with three holes to the internal part of the pedal. Fix the other end
to one of the adjustment opening so that the feet is fixed during training and easy to take out.
Repeat for the other pedal.
26