Introduction; The All-In-One Gauge - Veratron VL FLEX 52 Bedienungsanleitung

INTRODUCTION

PACKAGING CONTENT

THE ALL-IN-ONE GAUGE

The VL Flex device can easily be configured to be the
instrument you need - thanks to its sun-readable 1.44" TFT
display embedded into a standard 52 mm instrument
housing.
The supported analog inputs allow you to directly read
from your engine sensors, and the NMEA 2000® interface
CONTACTLESS CONFIGURATION (Patent Pending)
Thanks to the contactless configuration you can setup your
all-in-one instrument with a simple tap!
Launch the companion App and define your settings
through the user-friendly interface, then simply hold your
1x VL Flex 52 gauge

B 00043501
1x 52 mm Mounting
Spinlock

A 2C5205947101
expands this possibility by allowing the device to read from
the digital network.
The simple but effective graphic design can be set up in a
single or dual layout, presenting the data in a clear and
intuitive form, while the colored bar graph and the alarm
display allow you to visually understand your data.
mobile device in proximity of the VL Flex device to transfer
the configuration.
Thanks to the embedded passive antenna the
configuration can be done powerless!
INTRODUCTION
1x Wire Harness
A2C9582260001
1x Safety
Instructions
B000100
B000882