Veratron VL FLEX 52 Bedienungsanleitung Seite 10

NMEA 2000® CONNECTOR PINOUT
Pin No. Description
1 Shield
2 NET-S (V+)
3 NET-C (V-)
4 NET-H (CAN H)
5 NET-L (CAN L)
NMEA 2000® NETWORK CONNECTION
Once the installation is complete it is possible to interface the device to
the NMEA 2000® backbone through the dedicated plug on the
harness.
Please ensure to tighten the M12 connector by screwing ii onto its
counterpart, so to preserve the water tightness.
A drop cable is not needed unless the total length of the wire pigtail is
not enough to reach the NMEA 2000® backbone. In this case it is
possible to extend the total length by using one of the accessory drop
cables.
Please note that NMEA 2000® does not allow drop cables longer than
6 meters.
Refer to the NMEA 2000® standard for a proper network design.
DEVICE CONNECTION
Micro-C M12 5 poles plug
Male, cable side view
B000882