Yamaha YZ-Serie Fahrer- Und Wartungshandbuch Seite 39

Part number
YU-33975, 90890-01403 Steering nut wrench
This tool is used when tighten the steering ring nut to
specification.
YM-01434, 90890-01434 Rod holder
This tool is used to hold the fork spring.
YM-01437, 90890-01437 Rod puller
90890-01436 Rod puller attachment (M10)
These tools are used to pull up the fork damper rod.
YM-01442, 90890-01442 Fork seal driver
This tool is used when install the fork oil seal.
YM-01454, 90890-01454 Damper rod holder
Use this tool to remove and install the damper rod.
YU-3112-C, 90890-03112 Pocket tester
Use this tool to inspect the coil resistance, output
voltage and amperage.
YM-91042, 90890-04086 Clutch holding tool
This tool is used to hold the clutch when removing or
installing the clutch boss securing nut.
YM-34487 Dynamic spark tester
90890-06754 Ignition checker
This instrument is necessary for checking the ignition
system components.
ACC-QUICK-GS-KT Quick gasket
90890-85505 YAMAHA Bond No. 1215
This sealant (Bond) is used for crankcase mating sur-
face, etc.
Tool name/How to use

1 - 8
SPECIAL TOOLS
Illustration
YU-33975
5PA10300
YM-01434
5PA10310
YM-01437
5PA10320
YM-01442
5PA10340
YM-01454
5PA10350
YU-3112-C
5PA10360
YM-91042
5PA10370
YM-34487
5PA10390
ACC-QUICK-GS-KT
5PA10410
GEN
INFO
90890-01403
5PA10300
90890-01434
5PA10310
90890-01437
90890-01436
90890-01442
5PA10340
90890-01454
5PA10350
90890-03112
5PA10360
90890-04086
5PA10380
90890-06754
5PA10400
90890-85505
5PA10410