Yamaha YZ-Serie Fahrer- Und Wartungshandbuch Seite 186

STEERING HEAD INSPECTION AND ADJUSTMENT
4. Adjust:
Steering ring nut
G
Steering ring nut adjustment steps:
Remove the number plate.
G
Remove the handlebar and handlebar
G
upper bracket.
Loosen the steering ring nut 1 using the
G
steering nut wrench 2.
5PA30740
Steering nut wrench:
Tighten the steering ring nut 3 using
G
steering nut wrench 4.
NOTE:
Install the steering ring nut with its larger
G
chamfered side a downward.
Set the torque wrench to the steering nut
G
wrench so that they form a right angle.
5PA30740
Steering nut wrench:
Steering ring nut (initial tighten-
ing):
Loosen the steering ring nut one turn.
G
Retighten the steering ring nut using the
G
steering nut wrench.
WARNING
Avoid over-tightening.
Steering ring nut (final tighten-
ing):
3 - 33
INSP
ADJ
YU-33975/90890-01403
YU-33975/90890-01403
38 Nm (3.8 m • kg, 27 ft • lb)
4 Nm (0.4 m • kg, 2.9 ft • lb)