Installation And Operation; Safety Instructions; Technical Information For Installation - Bartscher 1509851 Bedienungsanleitung

5. Installation and operation

5.1 Safety instructions


Never allow the power cable to come into contact with heat sources or sharp edges.
The power cable should not hang over the side of the working surface. Ensure that no
one can step on or trip over the cable.

The power cable must not be folded, bent or tangled, and must always remain fully
unrolled.

Never place the device or other objects on the power cable.

Do not lay the cable over carpets or heat insulations. Do not cover the cable. Keep
away the cable from operating range and do not dunk it into water.

Do not use the device in case it does not function properly, has been damaged or
dropped.

Do not use accessories or spare parts that are not recommended by the producer.
They may cause a threat to the user and others, damage the device, and void the
warranty. Use only original spare parts!
WARNING! Hot surface!
When in use, the gas burners and electric oven get very hot. To avoid burns, do not
touch their surfaces!
When the device is in use, children should keep a safe distance from it.

Before cleaning or performing maintenance work, as well as when the device is to
remain unused for long periods, turn it off, remove the plug from its socket, and close
the gas valve.

Before first use, carefully remove the protective film from the device and remove
leftover glue with warm water and soap, or an appropriate solvent.

5.2 Technical information for installation

CAUTION!
All installation, regulation and maintenance work can be performed only by
qualified personnel.
The device must be installed in accordance with legal regulations.
The producer bears no liability for damage or injury resulting from failure to
adhere to instructions.
- 38 -