Cleaning And Maintenance; Safety Advice; Cleaning - Bartscher 1509851 Bedienungsanleitung

6. Cleaning and maintenance

6.1 Safety advice

o Before cleaning and before maintenance work, disconnect the device from its power
source by removing the plug from its socket, close the main gas valve and wait for
the device to cool.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and
the plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets.
Therefore, you must not use any kind of pressure water jet for cleaning the device!

6.2 Cleaning

o For best results and hygiene, clean the device every day when finished using the
device.
o Before cleaning, disconnect the device's power source, close the gas valve and
wait for the device to cool.
Gas cooking surface
o Remove the grills and gas burner shields.
o Clean the cooking surface using a soft cloth or sponge with warm water. A mild
cleaning agent (e.g. washing-up liquid) can be used if needed. Next, dry the
cooking surface.
o The grills and gas burner shields can be cleaned with a soft cloth or sponge and
a mild cleaning agent (e.g. washing-up liquid). A brass-wire brush can be used
for tough dirt or grease. Rinse the grills and gas burner shields thoroughly with
clean water, then dry.
o After cleaning the grills and burner shields, replace them before igniting a burner.
Multifunction oven
o Thoroughly clean the inside of the oven and shelf guides with a soft cloth or sponge,
warm water and a cleaning agent appropriate for enamel surfaces. Rinse thoroughly
with warm water and ensure that no leftover cleaning agent remains. Next, dry the
inside of the oven and guides for shelves.
- 49 -